Three parts material, seven parts process. In order to achieve the ideal insulation effect of rubber insulation cotton, the correct use method is essential. Next, Utsen insulation manufacturers will explain to you the precautions in the use of rubber insulation cotton.

1. Use environment

During the installation and use of rubber insulation foam, avoid high temperature, high humidity and corrosive environment. At the same time, keep dry and ventilated to prevent contact with acidic substances. In addition, when used outdoors, should avoid direct sunlight and rain.

2, avoid excessive compression/stretching

Rubber insulation cotton has certain compressibility and stretchability, but excessive compression or stretching should be avoided during use, which will lead to serious deformation of the material, which will affect the thermal insulation performance. Therefore, in the process of installation and use, the compression and tensile ratio of rubber insulation cotton should be reasonably controlled to ensure that it maintains good thermal insulation performance.

3, pay attention to the installation method

The correct installation method has an important impact on the insulation effect and service life of rubber and plastic insulation cotton. During the installation process, follow the installation guide provided by the manufacturer to ensure that the material is close to the pipe or device surface, leaving no gaps. At the same time, avoid pulling or twisting the material to avoid damaging its structure. After installation, check the rubber and plastic thermal insulation foam to ensure that it is not damaged or loose.

4, control the temperature range

The temperature range of rubber insulation cotton is generally between -50 ° C and 110 ° C. In the process of use, it should be avoided to be in too high or too low temperature environment for a long time, so as not to affect its thermal insulation performance and service life. In the environment where the temperature changes greatly, effective heat insulation measures should be taken to reduce the impact of temperature fluctuations on rubber and plastic insulation cotton.

5, regular inspection and maintenance

In order to ensure the use effect and safety of rubber insulation cotton, regular inspection and maintenance should be carried out. To check the appearance of the material and insulation performance, if found to be damaged or performance decline, should be repaired or replaced in time. At the same time, the surface of rubber insulation foam should be cleaned regularly to keep it clean. If the rubber insulation foam is seriously damaged or aged, replace it in time to avoid affecting the insulation effect and safety.

To sum up, the correct use and maintenance of rubber insulation cotton is the key to ensure its long-term insulation performance and safety. In the process of use, attention should be paid to the use of the environment, avoid excessive compression or stretching, pay attention to the installation method, control the temperature range, and regular inspection and maintenance.